StarCraft 3D Puff
Choose your Color...
Choose your color...
StarCraft 3D Puff
$
x
=
$
Loaded product description will go here once a selection is made.
StarCraft 3D Puff is a perfect material to give a 3D effect to any design. This multi-layered polyurethane HTV technology expands when heat pressed to become a soft puffed up look.
Bring an intriguing to look your t-shirts using this 3 dimensional heat transfer vinyl. When pressed and cared for properly, this heat transfer vinyl can often outlast the garment itself. 143VINYL offers StarCraft 3D Puff HTV in black or white in 12” x 12” and 12” x 24” sheets or 12” x 5ft and 12” x 5yd rolls.
StarCraft 3D Puff Specs:
- Applies to: 100% cotton, 100% polyester, Poly/cotton blend
- Not suitable for us on nylon and other coated textiles.
- Carrier: Polyester
- Material: PU Composition (multi-layered polyurethane)
- Finish: Matte/Flat/Dimensional
- Layering: Top layer only with other products, can layer onto itself
- Certifications: CPSIA, REACH
- (Carrier sheet down, mirror your image)
- Cricut: Iron On/Everyday Iron On
- Silhouette: Material: Heat Transfer Smooth - Blade 3/Force 8/Speed 7
- Brother: Blade 2/Speed 1/Pressure 1
- Time: 10-15 Seconds
- Temperature:285° F
- Pressure: Medium to Firm
- Peel: Warm
- * To maximize the 3D effect, remove protective carrier sheet and press a second time directly against the heat platen
- Time: 10-15 Seconds
- Temperature:285° F
- Pressure: Medium to Firm
- Peel: Warm
- * To maximize the 3D effect, remove protective carrier sheet and press a second time directly against the heat platen
- Wait 24 hours before the first wash. Do not dry clean. Machine wash warm with mild detergent. Dry at normal setting. No chlorine bleach.
StarCraft 3D Puff Cut Settings:
StarCraft 3D Puff Application Instructions:
StarCraft 3D Puff Care instructions:
Videos about StarCraft 3D Puff
143VINYL: StarCraft 3D Puff
Corinne Blackstone
Mr. Crafty Pants:
External Links:
By using this site you agree to our:
